Nissan 370Z Forum - View Single Post - Clear bra's spray -on

kenchan · 03-13-2016, 08:59 PM

problem with aerosol cans is that they loose pressure pretty quick while spraying a larger area.. front bumper is considered a pretty large area to paint evenly with a rattle can.

if you have access to a roll to do the hood, dat should go much easier than getting those pre-cut kits. pre-cuts tend to be cut short for some reason and they tell you to stretch the bra while you apply. and if u're not careful it tends to leave stretch marks..

if you do it by the roll, no need to stretch and get full coverage...

03-13-2016, 08:59 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	problem with aerosol cans is that they loose pressure pretty quick while spraying a larger area.. front bumper is considered a pretty large area to paint evenly with a rattle can. if you have access to a roll to do the hood, dat should go much easier than getting those pre-cut kits. pre-cuts tend to be cut short for some reason and they tell you to stretch the bra while you apply. and if u're not careful it tends to leave stretch marks.. if you do it by the roll, no need to stretch and get full coverage...