Nissan 370Z Forum - View Single Post - Specialty Z Max Street Flywheel, Clutch, CSC

threeseventy · 03-13-2016, 01:20 AM

I've been through two of the max Street clutch kits in 3 years. I had them install it after having the typical slave and master cylinder issues and needed something reliable for tracking. The first one lasted a year, possibly the installer setting it up incorrectly, but I've been told that the clutch disc/plate manufacturer is known for poor stack construction.. the components showed signs of tearing and burning when it was disassembled. The second one just started slipping at 23000. One light track day and daily use on each with 320 wheel hp manual 6. The first one was fraught with pressure feel and chatter issues. The second one Sebastian rebuilt and put it in himself and it functioned quite a bit better until yesterday. Not going with this setup again.

03-13-2016, 01:20 AM	#25 (permalink)
threeseventy Track Member Join Date: Mar 2011 Location: Huntington Beach, CA Posts: 600 Drives: Opinion Rep Power: 15	I've been through two of the max Street clutch kits in 3 years. I had them install it after having the typical slave and master cylinder issues and needed something reliable for tracking. The first one lasted a year, possibly the installer setting it up incorrectly, but I've been told that the clutch disc/plate manufacturer is known for poor stack construction.. the components showed signs of tearing and burning when it was disassembled. The second one just started slipping at 23000. One light track day and daily use on each with 320 wheel hp manual 6. The first one was fraught with pressure feel and chatter issues. The second one Sebastian rebuilt and put it in himself and it functioned quite a bit better until yesterday. Not going with this setup again. Last edited by threeseventy; 03-13-2016 at 11:16 AM.