Nissan 370Z Forum - View Single Post - Stillen air to air conversion fabrication thread

Numonik · 02-15-2016, 04:04 PM

EVOHunter,

Please contact me, I've been looking at this thread for almost 8 hours going over every pic and think I have a solution I'm not sure you tried. I was maxing out my Mafs at 8psi because of a very poor design with the Y pipe for the Mafs... It took me all of 2015 to figure out why I was getting this issue...

Seeing that you are still using this part in your build (at least from the pics it looks like you are) I think the same solution will fix your problem (if you haven't tried it)!

02-15-2016, 04:04 PM	#175 (permalink)
Numonik Base Member Join Date: Nov 2013 Location: Atlanta Posts: 16 Drives: 08 G37s coupe 6mt Rep Power: 12	EVOHunter, Please contact me, I've been looking at this thread for almost 8 hours going over every pic and think I have a solution I'm not sure you tried. I was maxing out my Mafs at 8psi because of a very poor design with the Y pipe for the Mafs... It took me all of 2015 to figure out why I was getting this issue... Seeing that you are still using this part in your build (at least from the pics it looks like you are) I think the same solution will fix your problem (if you haven't tried it)!