Quote:
Originally Posted by JWillis72
Injectors are easy, go 1,000 cc and you will have more than you need. If you want say 500whp I would recommend you use a CJM return fuel system, call or email Charles and tell him what WHP you want to make and thats done. After that all you need to do is order pulleys from Vortech. If you want to upgrade the impeller you will also need to send the supercharger off to have that done.
With Togunz kit and a good fuel system on the car it should be fairly easy after that or at least a hell of a lot easier than doing it like I have been doing.
|
I agree. Charles at CJM is the man. Very knowledgeable and helped me step by step when I installed my fuel return. Highly recommended!
__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34
|