Quote:
Originally Posted by TopgunZ
There has been a recent study by "Swiss370Z" where he had intake temps coming in at 230F and his water was 203F. In other words, the intake temps are barely being cooled.
|
A short feedback from me
The water temperature of 203F is the cooling water temperature of the engine!
Not the "STILLEN" cooling circuit!
The water in the return pipe of the Plenum Intercoller is only slightly heated!
About 10°C warmer than the air outside!
I'll check with a sensor in the water tank next time...
Exact dates will follow after installation of additional Air- Sensor (behind the Plenum Intercooler).
BTW:
If I could, I would go the way also ...
A2A 
Keep up this good Work Guys
