Nissan 370Z Forum - View Single Post - Another HFC Post

SlyZGuy · 01-27-2016, 10:48 PM

use this thread to offer fitment info only all that you have experience with by posting below. There are plenty of posts about performance that usually go off topic but fitment is a big issue with some aftermarket parts including HFC and test pipes and thus would be a good resource.

1. Brand
2. Fitment (Scale 1-10. 10 being best 1 being worst)
3. Fitment issues or feedback
4. Customer service experience regarding fitment issue, if any.
5. Build Quality (Scale 1-10) and feedback
6. Customer Service (Scale 1-10)

I'll go first with My review:

1. Top Speed (Resonated Test Pipes)
2. 1 (nothing to compare to personally but due to fact they had to be altered to fit)
3. Didnt line up with Top Speed Exhaust on either side, passenger more so then the driver side and had to be modified to be able to bolt up.
4. Manufacturer offered to replaced but were already on the car and cost to remove and send back plus wait time wasn't worth it at the time so they credited me towards cost to repaid ( 2 hours of shop time, but ended up being slightly more)
5. Didn't get a chance to personally inspect but shop said metal used was thin.
6. 10

01-27-2016, 10:48 PM	#1 (permalink)
SlyZGuy Base Member Join Date: Jan 2016 Location: Maryland Posts: 220 Drives: 2014 370z S/C M6 Rep Power: 9	Another HFC Thread- Fitment Comparison use this thread to offer fitment info only all that you have experience with by posting below. There are plenty of posts about performance that usually go off topic but fitment is a big issue with some aftermarket parts including HFC and test pipes and thus would be a good resource. 1. Brand 2. Fitment (Scale 1-10. 10 being best 1 being worst) 3. Fitment issues or feedback 4. Customer service experience regarding fitment issue, if any. 5. Build Quality (Scale 1-10) and feedback 6. Customer Service (Scale 1-10) I'll go first with My review: 1. Top Speed (Resonated Test Pipes) 2. 1 (nothing to compare to personally but due to fact they had to be altered to fit) 3. Didnt line up with Top Speed Exhaust on either side, passenger more so then the driver side and had to be modified to be able to bolt up. 4. Manufacturer offered to replaced but were already on the car and cost to remove and send back plus wait time wasn't worth it at the time so they credited me towards cost to repaid ( 2 hours of shop time, but ended up being slightly more) 5. Didn't get a chance to personally inspect but shop said metal used was thin. 6. 10 __________________ Stillen S/C \| '15 Nismo Conversion \| Aodhan \| Eibach \| Tokico \| SPC \| Z1 \| Evo-R \| Aerojacket \| HKS \| Berk \| CFE \| APR \| Amuse \| Z1 \| A2A IC \| AAM \| Buddy Club \| Last edited by SlyZGuy; 01-28-2016 at 12:31 AM.