Yea, ok i fixed it and it works great, i wired it wrong because instructions said pin 6 and 7 but they were missing so i thought that it maybe you meant 10 and 11...should have asked
Quote:
Originally Posted by VABAM
Based off your pic, you wired it in wrong. For starters the control signal wires that go to pins 6 and 7 require you to add pins to connector M66. Hopefully you didn't fry anything considering you wired the control wires (pins 4 and 5 of M67) to pins 10 and 11 of M66. Pin 10 is "LAN Signal" and pin 11 is "Each Motor Door Power Supply".
Why did you wire in to 10 and 11 instead of 6 and 7?  |