Nissan 370Z Forum - View Single Post - Piston rings fried

TopgunZ · 01-13-2016, 11:33 AM

I didn't want to make assumptions but I almost said in my last post that I bet those GTR injectors were seeing high duty cycles. If they were at 99% then that is 100% guaranteed what went wrong. So we cant blame the kit on this one at ALL. You should never go over 80% dc on injectors. Even if you had the Fast Intentions kit and paid 20K for it and every supporting mod and had them professionally install it, it would have blown. You ran out of fuel bro.

Now, if Sasha (BP) is really going to start mass producing an a2a setup for the stillen kit you can go that route. However, the most the v3 sc will put down on our cars is around 550whp. So even going that route you will not put a built longblock to use. The limiting factor is the impellar speed will top out and the bearings will give at anything over 14psi.

01-13-2016, 11:33 AM	#20 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I didn't want to make assumptions but I almost said in my last post that I bet those GTR injectors were seeing high duty cycles. If they were at 99% then that is 100% guaranteed what went wrong. So we cant blame the kit on this one at ALL. You should never go over 80% dc on injectors. Even if you had the Fast Intentions kit and paid 20K for it and every supporting mod and had them professionally install it, it would have blown. You ran out of fuel bro. Now, if Sasha (BP) is really going to start mass producing an a2a setup for the stillen kit you can go that route. However, the most the v3 sc will put down on our cars is around 550whp. So even going that route you will not put a built longblock to use. The limiting factor is the impellar speed will top out and the bearings will give at anything over 14psi. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM