Nissan 370Z Forum - View Single Post

TBatt · 01-07-2016, 11:05 AM

On December 29th, as planned, my buddy and I installed the Fast Intentions TDX CBE using the Ranger lift. The install was a breeze and we had plenty of room under the car, both of us. The height is really ideal to work under the car and you can use a low profile creeper too.

We not only installed the exhaust (which is awesome!) we installed upgraded sway bars (HUGE improvement over stock), the rear fog light and then gave the underside a good looking over.

Total time was around 2.5 hours. The lift setup took about 10 minutes from getting it out of storage to having the car up in the air and safety locked. I really like the Ranger lifts! Great investment!

My next planned project is installing a Stillen Super Charger in the June time frame. Along with that will be an oil cooler and possibly a brake upgrade. Either bigger brakes will be needed or a boat anchor and release mechanism........

01-07-2016, 11:05 AM	#33 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20168	FI CBE installed On December 29th, as planned, my buddy and I installed the Fast Intentions TDX CBE using the Ranger lift. The install was a breeze and we had plenty of room under the car, both of us. The height is really ideal to work under the car and you can use a low profile creeper too. We not only installed the exhaust (which is awesome!) we installed upgraded sway bars (HUGE improvement over stock), the rear fog light and then gave the underside a good looking over. Total time was around 2.5 hours. The lift setup took about 10 minutes from getting it out of storage to having the car up in the air and safety locked. I really like the Ranger lifts! Great investment! My next planned project is installing a Stillen Super Charger in the June time frame. Along with that will be an oil cooler and possibly a brake upgrade. Either bigger brakes will be needed or a boat anchor and release mechanism........ __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE! Last edited by TBatt; 01-07-2016 at 11:13 AM.