Quote:
Originally Posted by Bossless1
You're in St Pete and you took your car to Houston for a tune? Do you know anything about Circuit Motorsports in Orlando? Suppose to be a master tuner for Ecutek... I'm curious because I'm about to go there - but you didn't... help!
|
Don't know anything about them.. I did my install in Houston since my Brother-In-Law (lives there) has a lift, air tools, and the time/desire to help me tackle the work. Gamma was going to provide a canned tune - but it was heavily recommended by knowledgeable members on here to get a custom tune and I also wanted Ecutek instead of Uprev. A lot of people have a lot of great things to say about JTRAN, so I took it there and had an excellent experience with them.
Quote:
Originally Posted by warpeacelove
How much PSI?
|
Quote:
Originally Posted by TerribleONE
Also curious how much boost. #s look high for just WG spring pressure.
|
I actually don't know. I don't have a boost gauge installed yet! Build went down to the wire, just ran out of time so we didn't install it. Not sure when I will have the opportunity to do it going forward.
I set up the wastegate as instructed by Gamma... threaded the rod so it fit the wastegate lever in the closed position - then one turn tighter to tension it. I was also impressed by the power (figured we'd need to plumb in a boost controller) but everything looked so good off the bat I just left it.
Anyone know if I can get boost from Torque?