After the first successful GB we are releasing forum prices for both KIT 1 and KIT 2.
We have two kits one for base/nismo without any stock screen which is KIT NO 1 and for people with stock navigation screen either Z or G35/37 there is KIT 2.
Kit ONE:
Comes with 7' screen, HDMI cable, rotary joystick, control module, and optional extra sensor ports
600$
OBDII reader with cable:
108$
Console comes in three finishes and design is simple but without airlift module as in DEMO pics its just the joystick and CS emblem by default.
Console FRP 200$
Console FRP painted matte black 250$
Console CF 470$
Console Wrapped in leather and alcantara 475$
Any other module needed installed in the console will be discussed and quoted case by case.
Everything working in the pics and video is
only via OBDII, but for boosted guys following are optional sensors needed if any of these readings are needed, oil temp will come with sensor (free). There is a port for these below reading in the module so all what is needed is hooking up the sensors and two or three wires in the module.
NA Gauges pics (Fuel pressure needs sensor mistake in pic)
FI Gauge pic (Fuel pressure needs sensor mistake in pic)
Below are additional sensors incase anyone needs these
Exhaust Gas Temperature (EGT) K-Type thermocoupler probe sensor $85
Oil Temperature Sensor $20
Boost (MAP) Pressure Sensor $55
Intake Air Temperature Sensor $20
Intercooler Air Temperature Sensor $20
Fuel Temperature Sensor $20
Transmission Oil Temperature Sensor $20
Gearbox Oil Temperature Sensor $20
Exhaust Manifold Pressure Sensor $62
Fuel Pressure Sensor $62
Oil Pressure Sensor / Sender $62
AFR (Air Fuel Ratio) Wideband Controller Functionality $230
Kit TWO:
Its for people already with navi screen, kit comes with, rotary joystick, control module, and optional extra sensor ports in the module
435$
OBDII reader with cable:
108$
For Navi screen guys there is not need for screen and buyer will keep all existing functionalities of stock screen like navi, audio etc.
Any optional sensors price as above.
There is a provision to add rear view camera in the screen as well, and all gauges can be adjusted for redline
Readings can be made in kmh/Centigrade/Bar or m/Fahrenheit/PSI
Installation Instructions are attached
Shipping the Kits is approximately 75$ worldwide
KIT 2
