I could have used supplied spacer, that snaps on bottom of battery & raises it up about an inch; but liked the way it sit lower and flat in the tray.
I turned around hold down strap (notice arrow facing rear) and put the short J bolt in the lowest hole / then used a spacer (chrome 1/4 inch drive socket) over threads of longer front J bolt and put nut down against it. Holds good & weight of battery is about 1" lower.
Don't over tighten.
Width of battery is a tad narrower/ so when I get back to work, gonna make a rubberized spacer to go between top of battery & brace.....could leave as is; but gonna pay attention to detail.
720cca 160$ (including tax) works like a charm.
Btw.. Had to re-time my windows.
Sent from my iPhone using Tapatalk