Quote:
Originally Posted by MacCool
I wonder about that, since the opened/closed status of the hatch is part of the vehicle status display. However...
According to Chrisslicks, :
Quote:
According to the service manual the rear trunk release is wired to pin 67 (color GR) of the BCM. To send a "release" signal the pin is shorted to ground.
So for implementation you would wire a momentary switch (like the SRM switch) spliced into pin 67 and the other wire to chassis ground or electrical ground.
|
I believe Chrisslicks is correct. Except it may be terminal 61. FSM will tell you which switch is which.
The FSM also has diagrams showing how the wires are routed. You may be able to find an easy place to tap into the wire between the hatch button and BCM.