Quote:
Originally Posted by SouthArk370Z
Can you post which page(s) of the FSM have the hatch release wiring diagrams? Unless the hatch button status is sent over the CAN bus, you should be able to add a switch in the cabin and tap into the wire from the button to the BCM.
|
I wonder about that, since the opened/closed status of the hatch is part of the vehicle status display. However...
According to Chrisslicks, :
Quote:
According to the service manual the rear trunk release is wired to pin 67 (color GR) of the BCM. To send a "release" signal the pin is shorted to ground.
So for implementation you would wire a momentary switch (like the SRM switch) spliced into pin 67 and the other wire to chassis ground or electrical ground.
|