Quote:
Originally Posted by NeoNz
Hey,
So long story short, i was receiving faults and after my HFC install, already ordered new Downstream sensors to the NTK (OEM) and changed these and have been receiving these Error Codes from my BAFX Bluetooth Reader.
The code log below is from after i changed to O2 Sensors to the NTK OEM ones, Odd it is showing P0057 and P0037 now?! Heater Control Circuit Low. Does this mean those O2 sensors are bad that I just replaced?
I only received P0031 P0051 and P0150 before i swapped out the NTK Sensors. Crazy.
I will put the old stock ones back in. See if i can get it back to only P0031 P0051 and P0150. IF this is the case, do i need to change both upstream O2 sensors? Are they Shot?
Current Fault Log
------------------
P1168: Closed Loop Control (Bank 2)
Pending Fault Log
------------------
P0037: HO2S Heater Control Circuit Low (Bank 1 Sensor 2)
P0057: HO2S Heater Control Circuit Low (Bank 2 Sensor 2)
P0031: HO2S Heater Control Circuit Low (Bank 1 Sensor 1)
P0051: HO2S Heater Control Circuit Low (Bank 2 Sensor 1)
P0130: O2 Sensor Circuit (Bank 1 Sensor 1)
Historic Fault Log
------------------
P0152: O2 Sensor Circuit High Voltage (Bank 2 Sensor 1)
P0300: Random/Multiple Cylinder Misfire Detected
P1148: Closed Loop Control (Bank 1)
Other discovered fault codes
(possibly pending, current or manufacturer specific)
----------------------------------------------------
ECU reports no other fault codes logged
|
SO i changed out my downstream sensors back to the OEM ones i had and these are the codes im getting...looks like the Bank 1 sensor 2 and bank 2 sensor 2 codes went away. Seems like I should buy the OEM Upstream ones from rock auto...Are they hard to install? I saw the DIY someone wrote up, i just hope the crowfoot can get it out, i know how much of a pain in the *** they were to remove originally. i tried everything to loose them. What do you recommend for anti-sieze compound?
What is the difference between pending fault and current fault?
V3EV0A
Current Fault Log
------------------
P1148: Closed Loop Control (Bank 1)
P1168: Closed Loop Control (Bank 2)
Pending Fault Log
------------------
P0031: HO2S Heater Control Circuit Low (Bank 1 Sensor 1)
P0051: HO2S Heater Control Circuit Low (Bank 2 Sensor 1)
Historic Fault Log
------------------
P0152: O2 Sensor Circuit High Voltage (Bank 2 Sensor 1)
P0300: Random/Multiple Cylinder Misfire Detected
Other discovered fault codes
(possibly pending, current or manufacturer specific)
----------------------------------------------------
ECU reports no other fault codes logged
End of report.