Quote:
Originally Posted by gomer_110
You need less camber if you don't want to eat tires in the rear. Personally I'd run closer to -1.5 to -1.7. Not sure about the toe as it's in degrees but fwiw I have my rear toe set to 1/16" toe in total.
|
That's a lot of toe in too, 1/4"+.
.03123 = 1/32" ea side, or .0625 = 1/16" total toe.
Toe in or out is actually more of a tire eater than the camber. I ran -2.5 rear camber until I got toe bolts without much uneven wear at all. That was with the same rear toe setting rear, 1/16", in and dead Zero in front.