Quote:
Originally Posted by night blade
I used the Metra harness without cutting any wires, yeah it's not perfect and a lot of wires on it just don't hook up to anything on my 2016, but it works with what it has, you just need to pay attention to where the wires are supposed to go  . |
Thank you for the reply Night -- I'm surprised it work as well for you. As looking at the Metra pinout against the service manual, the only correct pin is for the primary power (#19 battery). I've attached the service manual pinout and metra pinout for reference.
I have no need for any of the speaker pins as I will run better wire from the headunit myself. But what I do need are pin numbers: #9 (illumination +) and #7 (ACC power). Of course, when looking at the Metra layout, both #7 & #9 are blank on the 70-7552 harness.
Looking at the 4100nex manual, both of these connections are needed on the receiver for Ignition switch (acc power #7 pin) and Illumination (+ #9 pin).
Which is why I ask is it possible to move pins around if needed?
