Quote:
Originally Posted by Trips
If your Z is NOT equipped with that connector?
You could look for a replacement male/female 2 wire connector.
Or you can also just cut that connector off and crimp on female connectors and crimp on male connectors coming from ground and power.
make sure you tape them up real good.
Thats the more ghetto way of doing it but will work.
*** Warning ***
IF none of what I said made any sense?
Please have a local guy with auto electrical experience wire them in for you.
Im just presuming you have some knowledge  |
I have a 2014 so the car is equipped with the harness, however, I'm trying to create a custom DTRL and didn't want to splice into the male end. So I was hoping they sell the Female end, that way I can just wire it to the female end and then plug it into the male end and call it a day. But thank you all your suggestions guys, I will look into them, maybe I'll find another way to do what I want. thanks again!