Nissan 370Z Forum - View Single Post

BoneZ · 09-08-2015, 05:55 PM

It would seem my email to Axxess did some good. There is now only one set of instructions for the 2012 base.

The gray/blue wire goes to pin 6, which is pink.

The gray/red wire goes to pin 16, which is blue.

Pin 15 (black) needs to be grounded.

Since it would appear these wires aren't needed, I may rearrange them on the harness to make the ASWC-1 install more "cut/tap free."

09-08-2015, 05:55 PM	#99 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	It would seem my email to Axxess did some good. There is now only one set of instructions for the 2012 base. The gray/blue wire goes to pin 6, which is pink. The gray/red wire goes to pin 16, which is blue. Pin 15 (black) needs to be grounded. Since it would appear these wires aren't needed, I may rearrange them on the harness to make the ASWC-1 install more "cut/tap free." __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns