Quote:
Originally Posted by kmsb3001
Ryan,
The car has CSC kit and Spec twin clutch .we already adjust but still same problem.
|
CSC kit - is this a HD CSC or the CSC Eliminator?
How did you adjust it when trying to resolve this?
Specifically what AFP setting did you have to start?
What AFP setting did you adjust it down to?
How high was the friction point off the floor initially?
How high did you go in testing?
I would setup the AFP to 0% (Knob fully clockwise until the plates retract fully towards you) This will be same as the stock pedal assembly for stroke. Next adjust it to a high friction point like stock. Does it still cause the same issue setup this way?
If so you will have the same problem with the stock pedal and its likely a problem with the clutch itself, MC or CSC.
If not then start from 0% and increase the AFP setting 10% at a time until you find the maximum your clutch can handle while also lowering the friction point a little each time.
I'm guessing there is something else going on with your clutch setup as in my experience 99% of people with a Twin plate clutch can typically run a full 100% AFP and a pretty low engagement without running into the issues your describing.