Im going to start doing some little updates from around the shop, figure people always like an inside look.
Feel free to keep posting product ideas! As the build season starts to roll in we are always looking for more work haha.
This last weekend the guys where down at Texas Motor Speedway for FD, weekend did not end perfectly but given the circumstance a 3rd place is nothing to hang your head at.
We ended up getting taken out by a mechanical failure sadly, Chris came over the radio right before lining up against Yokoi and told us his clutch had been acting up. We knew there was nothing we could do about it at the time but the culprit was found today. An ongoing flywheel issue led to a broken input shaft which then led to destroyed clutch discs. The car would stall if not accelerating which is why the restart and the bump in turn 1 when the car stalled on a handbrake pull. Hate to get taken out by something out of our control but hey, that's racing!
Keep in mind this clutch sees the raw end of 1000hp and a heavy right foot so things happen haha.