@kbc749
How did you manage to make it work? I spent several hours troubleshooting this yesterday. I have a Base 370z with Sports package. The wires on the car side are red (with grey-blue ASWC wire soldered to it) and dark blue (with grey-pink wire soldered to it). Head unit is Kenwood. ASWC red wire is connected to 12V switched wire (the one that has power only when ignition is ON), Ground (black wire) is connected to the car frame.
When turned on I get 7 green blinks (have no idea what this sequence means), then 2 red blinks (which appears to be my Kenwood being detected). Then ASWC goes into continuous red-green blinking mode.
When I try to reset ASWC following the manual (press Reset 3 seconds after ignition is turned on, hold for 10 seconds, then release) I get red-green blinking continuously.
I also tried the opposite: grey-pink to red and grey-blue to blue. I get exactly the same result.
I have the most fresh version of firmware on ASWC. The only thing I didn't try yet is force re-install the firmware and try installing the device again.
|