Any racers here gonna use this? I wanna hook up an accusump to protect the motor. I found this Canton racing product that will bolt down in between the filter and block or block and thermal plate for a oil cooler or a block and factory cooler. Makes install of a sump seem 10 times easier and you don't have to cut and Tee into your cooler lines which I don't think you can do anyways because the sump needs a direct shot at the block vs having to go through the filter first. Also this product will also let you stay with the OEM location of the filter vs having to buy a morcol filter relocator plus more oil lines.
Anyone run this or see these? My only question is install. The morcol thermal plates and OEM cooler are not threaded through the middle. I'm not sure with this being threaded how a bolt going through will tighten when the blocks threaded too. Also with a thermal plate that's a lot of plates built up like some run a cooler with the OEM cooler. I know space gets killed down there for the filter.
Phunk any thoughts? Maybe the next group buy if you made a sandwich plate that's not threaded inside? Thinner design? Comes with a bolt or bolts to lock it all down?
Accusump Adapter Sandwich Plates - Accusump Adapter Sandwich Plates- 20mm x 1.5 thread and 2-1/2 or 3-1/8 O-ring