Nissan 370Z Forum - View Single Post

frankiev · 08-09-2015, 05:26 PM

My current setup consisted of DLS r6 component speaker feed by a JL audio 300/2 and an Infinity perfect 10 in a sealed enclosure feed by a JL audio 500/1
The DLS 6.5 go incredibly low I think the feq resp is around 30 to 20k . Of course I wouldnt run them that low .
The JL's have built in crossovers of either 12 of 24bd slope .Currently running the fronts crossed at 80 12db and the rear at 85 12db .
Also using an old school audio control eql (12band eq)to eq the front and an audio control 4.1 to eq to tweek on the fly for different sources etc. So the eql is a dynamic eq and the 4.1 is a stattic eq .
Adjusting the crossover pt and slope is making me nuts so Im looking for any advice or suggestions
Thanks

08-09-2015, 05:26 PM	#1 (permalink)
frankiev Base Member Join Date: Apr 2015 Location: so fl Posts: 89 Drives: 2012 370 nismo Rep Power: 10	Advice on crossover point and slope My current setup consisted of DLS r6 component speaker feed by a JL audio 300/2 and an Infinity perfect 10 in a sealed enclosure feed by a JL audio 500/1 The DLS 6.5 go incredibly low I think the feq resp is around 30 to 20k . Of course I wouldnt run them that low . The JL's have built in crossovers of either 12 of 24bd slope .Currently running the fronts crossed at 80 12db and the rear at 85 12db . Also using an old school audio control eql (12band eq)to eq the front and an audio control 4.1 to eq to tweek on the fly for different sources etc. So the eql is a dynamic eq and the 4.1 is a stattic eq . Adjusting the crossover pt and slope is making me nuts so Im looking for any advice or suggestions Thanks