Quote:
Originally Posted by lhinojos
Okay so what I'm getting is that setrab uses stronger materials? Im not trying to cheap out, but I'm looking for more then a "this is better" get this, I wanna know why it's better.
|
Just my $0.02. Both diff and oil are well controlled with these cheaper priced coolers and in my hands the cheaper ones a solid beast. Uses maybe 16-18 gauge aluminium and stamped. It's no joke on construction.
Just installed a tru-cool 48 row oil cooler and removed the oem oil cooler. My hoods also vented, bumpers cut out more, run a bigger oil filter, run oem coolant with about a gallon or so of race formula coolant, a bottle of water wetter and maybe 1/2 gallon of water. (It's just what I had laying around.)
Before on a day like today at 88* and 70% humidity on the highway just cruising I was around 200* on the oem gauge. Hottest I've gotten it up to was about 220-230* with sprinted driving. Clearly the oem cooler, coolants, and vent were doing their jobs cause that's not bad!
Now with the cooler which holds 846mL and easily another 100mL + in the lines (1quart), I'm at about 7 quarts total. Just highway driving the gauge was stuck on 180*! Out in the country with sprints from stops signs etc I got it up to 185*. I say for a kit I built and only spending $80 on the cooler this things a steal!! I do not see the point going with a built kit or a Setrad cooler costing $250-$350 for the cooler alone.