Nissan 370Z Forum - View Single Post

laytonanthony · 08-07-2015, 05:55 AM

Hi guys
Checked the Oil gallery gaskets and they were both fine! Although i now have 2x new ones to replace.
Sorry its been a while I have been very busy with work. The Engine timing is mechanically spot on from what I can see. Pic attached

full size: Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
The orange links don't line up as I cranked it over a few times to get TDC. All timing marks lined up and seems to be fine. Obviously the only marks I couldn't see was the one on the rear of the cam sprocket which this was down to my engine builder to get right!!
One other question can the cam sprocket plates on the front which the cam sensors pick readings off be adjusted?. Could the engine builder of not set these right? Could they be on opposite side?
Thanks

08-07-2015, 05:55 AM	#24 (permalink)
laytonanthony Base Member Join Date: Jun 2015 Location: england Posts: 22 Drives: Nissan 370z Rep Power: 10	Hi guys Checked the Oil gallery gaskets and they were both fine! Although i now have 2x new ones to replace. Sorry its been a while I have been very busy with work. The Engine timing is mechanically spot on from what I can see. Pic attached full size: Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting The orange links don't line up as I cranked it over a few times to get TDC. All timing marks lined up and seems to be fine. Obviously the only marks I couldn't see was the one on the rear of the cam sprocket which this was down to my engine builder to get right!! One other question can the cam sprocket plates on the front which the cam sensors pick readings off be adjusted?. Could the engine builder of not set these right? Could they be on opposite side? Thanks Last edited by laytonanthony; 08-07-2015 at 06:03 AM.