View Single Post
Old 07-31-2015, 03:21 PM   #1 (permalink)
Carbon_z
A True Z Fanatic
 
Carbon_z's Avatar
 
Join Date: Sep 2009
Location: Atlanta, GA
Posts: 1,694
Drives: Carbon Fiber 370z
Rep Power: 19
Carbon_z is a splendid one to beholdCarbon_z is a splendid one to beholdCarbon_z is a splendid one to beholdCarbon_z is a splendid one to beholdCarbon_z is a splendid one to beholdCarbon_z is a splendid one to behold
Talking CarbonZ 400z TT 1000+rwhp Engine Build

Wanted to share what I have been working on for the last 7 months. In addition to the new body modification and interior, the performance aspect of the build is the most extensive. Should be finished sometime in the next few weeks. My good friends at Forged Performance are building it and we are definitely out to seek some high horsepower. 1300hp, 1100whp. We will have dyno numbers with pump gas, race gas and e85.

I would like to thank the following companies for working with me on this build and being apart of it: Recaro, Fast Intentions, Wilwood Brakes, Air Lift Performance, Meguiar’s, JL Audio, ECUTEK, Forged Performance, Brian Crower, Nitrous Express, Cartunes of Atlanta, Dark Dog Customs, Carbon Signature, MotorDyne, Carbon Signal, Onsite Shine, CSF Radiator, Carbon Signature.

The new mods for 2015 are as follows:

Dyno video of the Z maxing out the limits of the dyno dyamic dyno at 25psi. We will have to take her to a dynojet dyno to get the correct numbers and also numbers at 35psi as the video is only showing a 25psi while maxing out the dyno.
http://www.youtube.com/watch?v=-_B-uNtfwCI
-Fast Intentions Stage 3 Twin Turbo Kit TiAL HTZ-3579 (Billet Wheel) ALPHA Cover (rated for 1,150 rwhp)
-Brian Crower 4.0L Stoker Kit Billet Crank, 92 mm stroke
-PRO H rods w/ 625+ fasteners
-High Compression Build 11.0:1 JE pistons w/ 9310 pins, rings and locks and fully balanced
-Balance Crank, Pin, Deck, Bore Hone, soda blast, reinforced block
-ARP Main Stud Kit
-ARP L19 Head Stud Kit
-Billet Polyurethane Motor Mounts
-Billet Polyurethane Transmission Mounts
-MotorDyne TDX 3 inch Full Exhaust System
-3" down pipes (SS) w/recirculating wastegate tubes.
-E85 setup with upgraded fuel pumps and injectors
-Fore Innovations GT-R r35 Triple Fuel Pump Module with FC3 Staged Controller 4 gauge wiring (Rated for 1,600 whp)
-Flex Fuel
-TiAL V-band .86 exhaust housings
-ECUTEK Software Tuning
-CSC elimination kit
-CSF Triple By-Pass Radiator
-OS Giken R4C 215mm Quad Plate Clutch Kit
-ID 1700 injectors
-GT-R Upper Intake Manifold
-RJM Lower Intake Manifold and Fuel Rails
-Differential Adjustments down to 3.39 gears
-Wilwood Forged Narrow Superlite 6R Big Brake 6-piston F. BBK and 4-Piston R.
-Air Lift Performance Digital Air Ride Kit with Air Struts and Autopilot V2 management system with dual viar 325 chrome compressors
-RECARO Sportster Carbon Fiber CS Sport Seats
-Carbon Signal Full Color Graphic Multi-gauge HDMI Digital Cluster with Air Lift Performance Integrated box slot
-Shaved Engine Bay
-Pearl Line

Several other components have been left off list until closer to completion

Below are some pictures of the progress
































__________________

Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

Last edited by Carbon_z; 04-28-2017 at 12:13 PM.
Carbon_z is offline   Reply With Quote