Nissan 370Z Forum - View Single Post

kenchan · 07-30-2015, 07:22 PM

i had great luck with duplicolor engine enamel paint on the front of the car (no joke).

i used a low-gloss black on a fog lamp bezel on my dd, went through 3-4yrs of hard snow/salt winter and came out with very minimal chips.

you can clearcoat over the finish to get u the gloss you want. might even recommend UV clearcoat.

i recommend doing it in 2 steps (base coat + clear coat) so that you can add more clear over the black and wetsand/polish it real nice and flat (shiny) after it dries. GL

07-30-2015, 07:22 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i had great luck with duplicolor engine enamel paint on the front of the car (no joke). i used a low-gloss black on a fog lamp bezel on my dd, went through 3-4yrs of hard snow/salt winter and came out with very minimal chips. you can clearcoat over the finish to get u the gloss you want. might even recommend UV clearcoat. i recommend doing it in 2 steps (base coat + clear coat) so that you can add more clear over the black and wetsand/polish it real nice and flat (shiny) after it dries. GL