Thread: VQ35HR Stillen S/C & VQ37VHR Stillen S/C setups
View Single Post
Old 07-29-2015, 02:33 PM   #2 (permalink)
EVOHUNTER
Track Member
 
EVOHUNTER's Avatar
 
Join Date: Jul 2011
Location: Edmonton, Canada
Posts: 681
Drives: BOOSTED3-7-0
Rep Power: 15
EVOHUNTER is a jewel in the roughEVOHUNTER is a jewel in the roughEVOHUNTER is a jewel in the roughEVOHUNTER is a jewel in the rough
Default
Quote:
Originally Posted by Lucas08'Nismo View Post
Alright folks, I have a 2008 Nismo 350Z with the VQ35HR Stillen supercharger kit on my car. I am in search of information because My350Z forum does not have a thread on this supercharger.

My question is: Are the VQ35VHR and the VQ35HR serpentine pulley setup the same? If so, is anyone running a vortech 2.87" pulley on their S/C and did you have to change the length of the belt to compensate the .050" between the OEM S/C drive pulley or did the tensioner make up for the difference?

Belt part numbers would help me out a lot if anyone has one.

Any help is appreciated. I have leaned on this group for almost my entire build so far. Thank you very much everyone!

Not sure about the serp sizing.

But im running a 2.70" on my charger and using the same belt setup as it came from stillen
__________________
EVOHUNTER is offline   Reply With Quote