Originally Posted by 1LIFE

I used paint on everything except the radio console for which I used Plasti (wanted a texture there). The most important thing is to prep the pieces properly, I always use an ultra fine sand paper then rub down thoroughly with rubbing alcohol. Also once I finish the last coat of paint I apply a very light coat or 2 of clear coat (not enough to make it shiny). As for taking the pieces apart, there is DIYs on here for that and the areas you cant find DIY for you just have to figure it out. The triple gauge cluster is the trickiest and the rear strut brace requires you to remove basically every interior panel from the console back lol. If you knock it out 1 thing at a time its not bad, and as for wear/chiping no issues if prep and paint are done properly..