Quote:
Originally Posted by Ma Zede
Hi Guys,
I need some help for the new setup i want. Purchasing Work CR Ultimate's with the following sizes:
F: 19X9.5 +25
R: 19X10.5 +12
Tires (RE 11's):
F: 265/35/19
R: 285/35/19
I will be lowering on KW V3 coilover's. Question is, will this setup sit flush with the fender. I don't want to use spacers. Any suggestions would be greatly appreciated. If you recommend a different tire setup let me know. I wouldn't mind going 305 in the back if I don't stick out, but I think that's unlikely.
|
305/30's in rear will keep your diameter at 26.3" Front & Rear.
the 305 has a section of 12.2 & tread of 11.1 which will fit the rim fine-pending on your camber setting about sticking out?
the 285/35's are 26.9" tall & may cause your traction light to go on and off.
I personally like the tread width on the tire to be the same as the overall rim width;in your case,,,a 9.5 wheel is 10.5" wide & 10.5 wheel is 11.5" (that's Lip to Lip)
Michelin has a much larger selection with the PSS tire....but width's change with manufacturer-weren't sure if you were a fan of the stretched look or the fat/slight bulge or straight up & down.? something to think about.
Rear camber will play a huge roll in sticking out or not.