Quote:
Originally Posted by TopgunZ
Disregard how the "old stillen" was set up. That's what were trying to get away from anyway. Since you are on a blow thru setup now you can dump to atmosphere. The only reason not to is to reduce bypass noise. Just put a breather filter on your valve cover. The only reason that line is there is to supply a filter of sorts that you already have. You can eliminate 2 vacuum lines. But it will still work either way.
Is Sasha custom fabbing your Y pipe? I was going to use the Y from the stillen kit as mine. Then either place my MAFS there or move them closer to where you have them in your drawing. But then I will need to buy some MAF housing pipe and 3D print a couple of plugs to put in the old holes of the Y.
|
Were dumping that y pipe and making a whole new one.
Your right, im dumping those lines to the blower and venting the BPV to the atmosphere. Ill leave the lines from the intake mani to the valve cover alone.
I was thinking of putting a 1" breather filter on the bypass like they do it on the 2013 5.0 mustang votech kit.