Nissan 370Z Forum - View Single Post

Z eliminator · 07-13-2015, 08:31 AM

I would take the intake from the stillen 350z set up and make a new plate that fit the 370z lower intake.
the next step would be to mount the blower on top of the stillen intake.
Stillen did put a m90on the 350z ( 2003) but it did not work it was too big>
I spoke to engineer's at stillen who did the project .
the TVS makes a lot less heat than a M90,

Z

07-13-2015, 08:31 AM	#10 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	I would take the intake from the stillen 350z set up and make a new plate that fit the 370z lower intake. the next step would be to mount the blower on top of the stillen intake. Stillen did put a m90on the 350z ( 2003) but it did not work it was too big> I spoke to engineer's at stillen who did the project . the TVS makes a lot less heat than a M90, Z __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.