Nissan 370Z Forum - View Single Post

Aizen Sosuke · 07-02-2015, 10:06 PM

So my shop dropped my transmission this week and installed a new clutch kit, CSC and master. The original CSC took a crap right as the car crossed 100k mile and I took the chance to replace the original clutch and master cylinder too just to be on the safe side. In any case after everything was put together I take the car for a test drive today and the shifter is different and not in a good way.
When I try to shift from 4th to either 5th or 6th I feel like the stick travels all the way right past the 5 and 6 gate. It even goes all the way to reverse without pressing down on the shifter. This is obviously not right so I searched here and was only able to find a thread about shifter guide plates but for 350Z. Any light you guys can shed on this would be greatly appreciated.
Thanks

07-02-2015, 10:06 PM	#1 (permalink)
Aizen Sosuke Base Member Join Date: Aug 2011 Location: Miami Age: 40 Posts: 189 Drives: 09 370Z Sport Rep Power: 14	Help!! Shifter feels weird. So my shop dropped my transmission this week and installed a new clutch kit, CSC and master. The original CSC took a crap right as the car crossed 100k mile and I took the chance to replace the original clutch and master cylinder too just to be on the safe side. In any case after everything was put together I take the car for a test drive today and the shifter is different and not in a good way. When I try to shift from 4th to either 5th or 6th I feel like the stick travels all the way right past the 5 and 6 gate. It even goes all the way to reverse without pressing down on the shifter. This is obviously not right so I searched here and was only able to find a thread about shifter guide plates but for 350Z. Any light you guys can shed on this would be greatly appreciated. Thanks