Quote:
Originally Posted by bpd138
The kenwood DNX-6140 will fit right into the factory bracket. You won't need washers to space anything. Although the factory radio has four screws holding it in place on each side of the bracket, I was only able to get three screws in on each side of the head unit. The last hole was only off a little bit and the hole in the bracket could be elongated but I felt the three screws on each side was strong enough.
|
I am also doing a Kenwood install and agree only 3 per side. However, I am having large gaps around the HU and the bezel won't work with the stock climate control. I'll play with it some more tomorrow. How did your's look?