Quote:
Originally Posted by JARblue
I'm not sure you read my post correctly; I wasn't talking about Z1's quote  I was referring to your claim that "some on forum say they got to get car on ramps and adjust every 2nd fill-up". Where did you see this?
I cannot say how it would work with the various forced induction options, but Z1 might be able to give some guidance. |
Quote:
Originally Posted by JARblue
WHERE DID YOU READ THIS? I was asking for a link to their post because they are spreading misinformation 
That is just a standard disclaimer. The slave elimination kit functions in a very narrow window because the cylinder length is static once installed. Removing one bolt/nut and loosening two nuts allows you to extend the cylinder as needed to account for clutch wear. The clutch wear limit is only a few millimeters, so that is all you will be adjusting it over the life of the clutch. I won't profess to know exactly how much one turn extends the cylinder, but if a 1/2 turn is all that is needed every 10-12K miles (based on my personal experience) then my guess is that one turn adjusts the cylinder length about half a millimeter.
The process of the adjustment is quite simple. If you can get the car on jack stands and can use a wrench, you have enough mechanical aptitude to do the adjustment. The fact that you are all hung up on the generic Z1 disclaimer language and not on the fact that someone said it has to be adjusted every other time you fill up with gas (which is just flat out stupid) would leave me to believe that you have ulterior motives  I'm not suggesting this is the case; I am just telling you that is the impression that you are giving  |
I'll look here & also on the350z forum since i readbot as well as go through saved PM's.. I will also check out Z1 PDF for more info as well as their info on 1 how to adjust, 2 how often to adjust 3 what a symptoms of need to adjust. 4 Fitment with turbos.... How often did you say you adjust yours? Posts your steps of adjustments as well as pics. I seem to recall someone on this forum stating they put pics of adjusting the Elimination unit. Was that you? Where can o find the pics?
Sent from my XT1254 using Tapatalk