Nissan 370Z Forum - View Single Post - Sticky: (Official) 370Z Clutch Pressure (CSC) Failures

pbs370z · 06-24-2015, 02:15 PM

I filed my CSC Failure complaint here: (easy, only took about 5 mins)

https://www-odi.nhtsa.dot.gov/Vehicl...nt/index.xhtml Conf. No. (ODI) 10726352

I know this has been said before, but if there's any chance of forcing Nissan to take responsibility for this problem then a lot of us are going to have to complain where it could do some good.

My symptoms were: Clutch pedal occasionally sticking to floor on a warm day with engine hot and running hard. It never did leak fluid and I could pop the clutch pedal back up easily with my toe. It would work normally after it cooled a bit.

Fix: Installed the Zspeed HD CSC improved slave cylinder (along with a whole new clutch 'n flywheel).

P.S. Thanks BamBam !

06-24-2015, 02:15 PM	#709 (permalink)
pbs370z Base Member Join Date: Jul 2010 Location: Near Portland, OR Posts: 92 Drives: '10 370Z, Sport Pkg Rep Power: 3370	370Z Clutch Slave Cylinder Complaint to NHTSA I filed my CSC Failure complaint here: (easy, only took about 5 mins) https://www-odi.nhtsa.dot.gov/Vehicl...nt/index.xhtml Conf. No. (ODI) 10726352 I know this has been said before, but if there's any chance of forcing Nissan to take responsibility for this problem then a lot of us are going to have to complain where it could do some good. My symptoms were: Clutch pedal occasionally sticking to floor on a warm day with engine hot and running hard. It never did leak fluid and I could pop the clutch pedal back up easily with my toe. It would work normally after it cooled a bit. Fix: Installed the Zspeed HD CSC improved slave cylinder (along with a whole new clutch 'n flywheel). P.S. Thanks BamBam ! __________________ '10 Z, Sport Pkg 6 MT, Stillen Brake Cooler, Z1 Oil Cooler w/Setrab 25 row/Mocal T-stat, Southbend Clutch w/light wt Flywheel. Last edited by pbs370z; 06-24-2015 at 06:52 PM.