View Single Post
Old 06-17-2015, 04:14 PM   #90 (permalink)
kbc749
Base Member
 
kbc749's Avatar
 
Join Date: Jan 2015
Location: Columbus Ohio
Posts: 161
Drives: 2010 370z 6MT
Rep Power: 10
kbc749 is on a distinguished road
Default

So I need some help

I have a clarion nx702 and the aswc.
My wiring is pink to red/gray.
And blue to blue/gray.
Grounded to a head unit bolt.
And red to red.
And the 3.5mm male to female of head unit

The programming unit has power and the LEDs function but I'm having an issue programming.

I can enter the auto programming mode and it will perform this process.

-rapid blinking after reset,
-then hold Vol up until slow blink begins
-then I get my 7 green blinks (which all appear to be short blinks)
-then I get my 3 red blinks indicating a clarion head unit.
-then I get a slow red blink green blink red blink green blink continuously.

I do not see a slow red blink / slow green blink continuous in the troubleshooting guide.

When I try the manual programming mode, when I hold Vol+ to start the first programming, it never goes solid, it will simply go slow red blink slow green blink continuous. I don't know what this code means and am therefor lost.

Any help you could provide would be phenomenal.

Thanks,

KBC

Last edited by kbc749; 06-17-2015 at 04:26 PM.
kbc749 is offline   Reply With Quote