Quote:
Originally Posted by Bonzo
Here are some sequential pictures of the back. You will see that in the end there is about 1/4" poke.
|
Today I did a test install of one 20mm spacer on the left rear of my Z to see if I would run 20s or 25s. The plan was not to get too fancy because they were coming right back off again. We dropped the car back on the ground, and I drove it back and forth a few times, braking at each end to get the car to settle.
I took some pics but they were on a BB and were so atrocious I haven't posted them. My pics look JUST like these. There is no way I could go to 25s on the rear. I bought one pair of 20s, now I'll get a second pair.
With reference to my above post;
There were absolutely NO issues with the spacer mounting lugs extending past the face of the spacer, so cutout room on the wheel is of no consequence. (the stock studs did though) The room is there, it's not needed, at least not for the lugs. I will still have to look at the front wheels again.
104