Nissan 370Z Forum - View Single Post

Tombonombona · 06-03-2015, 01:33 PM

Ok guys, have an oddball question.... I am assuming that the sensor that is at the front and bottom of the engine is an oil pressure sending unit for the ECU, please correct me if I am wrong.
Now on my car I had an aftermarket oil press gauge installed (Defi) and the person that installed it used a couple adaptors to make both sensors work and what has happened is now both sensors are hanging off a long thin stalk of adaptors. What I am wanting to do is to make a remote manifold that I can hard mount to something and connect to the engine via a flexible line.... I just don't know where to find the thread sizes or pitches.

Thank you in advanced.

06-03-2015, 01:33 PM	#1 (permalink)
Tombonombona Base Member Join Date: May 2012 Location: Sk, Canada Posts: 159 Drives: 2012 370z Mag Black Rep Power: 13	Oil Pressure Sensor threads size Ok guys, have an oddball question.... I am assuming that the sensor that is at the front and bottom of the engine is an oil pressure sending unit for the ECU, please correct me if I am wrong. Now on my car I had an aftermarket oil press gauge installed (Defi) and the person that installed it used a couple adaptors to make both sensors work and what has happened is now both sensors are hanging off a long thin stalk of adaptors. What I am wanting to do is to make a remote manifold that I can hard mount to something and connect to the engine via a flexible line.... I just don't know where to find the thread sizes or pitches. Thank you in advanced. __________________ Tom B. Exotic Speed R2 Titan Catback-GTM Stage 2 Supercharger 522 whp on a mustang dyno 2004 Subaru STi **SOLD WRITTEN OFF**