Originally Posted by Zipper 104

Rear Left Camber -1.59, Toe 0.05 in.
Rear Right Camber -1.64, Toe 0.05 in.

Front Left ended up -1.22, Toe 0.03 in.
Front Right ended up -1.48, Toe 0.02 in....Right Front camber just out of spec.
Nothing can be done with the front camber unless I get the SPL front arms.

The only issue the alignment shop had was on the left rear and getting the toe bolt to hold tight. He could move it with two wrenches after it was torqued. He wasn't happy with it. He replaced it with a stock Nissan toe bolt. All good.
When the bolt was removed and inspected, it was stretched. His response was sometimes the aftermarket stuff is not any better, or even as good as the stock parts. The toe bolt in his words was, Gar-Bage.
He suggested I keep an eye out for signs of the right rear slipping and if so, pop the stocker back in that side too.

104