I found this
INFO
Nissan 370Z RaceROM Phase 2
ProECU Updates:
Fully defined Variable Timing Control (VTC)
Set the VTC angle at idle, overrun and on full load
Fully defined Variable Valve Event Lift (VVEL)
Set the VVEL angle at idle, overrun and on full load
Knock control per cylinder
Log and adjust the knock limit for each cylinder
Throttle and torque control
Torque limits and full pedal to throttle control
Detailed Fuel Injector control
Injector size, lag time and firing angle
Overrun fuel cut
Control when the fuel injectors restore
MAF Sensor rescaling
Rescale for new intakes without upsetting the engine load
Cruise control
Adjust the maximum target and set speeds
Radiator fan control
Adjust the fan duty cycle
Gear Ratios
Correct for new gears or final drives
New RaceROM Features:
Map Switching
Rev counter indication of the four different map switch modes
Flat Foot Shift
Full throttle gear changes (Manual Transmission models only)
Speed Density
MAP sensor based tuning with VVEL compensation
RaceROM Controller
Use the cruise control switch gear for adjusting calibration
Knock Warning
Check engine light flashes when knocking is detected
Per Gear Rev Limit
A different rev limit in each gear
Custom Maps
Create a map to do almost anything!
Launch Control
Adjustable Launch RPM using the cruise control (Manual Transmission models only)
Traction Control
Adjustable traction control using custom maps
Boost Control
Closed loop boost control using custom maps
Flex-Fuel
Ethanol flex-fuel tuning using custom maps
AFR Control
Closed loop target AFR control using custom maps
Fail-Safe
Protect the engine from any dangerous situations
Gauge Hijack
Display lambda, AFR, fuel trims or ethanol content on the oil temp gauge