Quote:
Originally Posted by 370zHawaii
Nice what did you use for your headlights, I have been trying to figure this out for a while but no luck.
|
First clean it off. Then I wetsanded with 2000. You can then go to 2500 and then 3000 but I wanted to do this same-day and 2000 is all I could get.
Then I used meguiars m105 (high cut compound) with a high cut pad to get rid of sanding marks.
Then followed it up with meguiars m205 (light cut polish) with a low cut pad to get rid of the high cut marks.
3 coats of klasse paint sealant and 1 coat of wax because I'm anal.
Quote:
Originally Posted by firulice
I'm just getting into this in a small way. Do I have this right...wash, clay, polish, wash, and wax? I'm just doing it by hand with mainly meguires products. If I get half as good of results as you I'll be happy
|
Wash, clay, (some like to wash again after clay), compound if needed, polish. sealant/wax.
Doing this all by hand unfortanutely will not net you great results as far as swirl marks.
What it will do is make your still feel incredibly smooth.
Hope this helps.