Nissan 370Z Forum - View Single Post - DIY: Cheap in-car camera mount

MightyBobo · 12-10-2009, 06:09 AM

You guys are killing me lol.

OK, I'll say again - when I installed the mount for the example video above, the noise was mainly due to the fact that I did NOT tighten down the u-bolts enough, due to quickly fading daylight.

Now, Im not saying that there isnt SOME rattle when I tighten them completely, but the VAST majority of the noises in the video are due to two things:
1) Loose u-bolts
2) Loose camera mount on the wooden dowel, so it was knocking against the wing nut at the top anytime I'd hit a bump.

I will record another example when I pick the car up from the body shop on the way home.

12-10-2009, 06:09 AM	#12 (permalink)
MightyBobo A True Z Fanatic Join Date: Feb 2009 Location: Las Vegas, NV Posts: 8,465 Drives: No cars; only bikes Rep Power: 52	You guys are killing me lol. OK, I'll say again - when I installed the mount for the example video above, the noise was mainly due to the fact that I did NOT tighten down the u-bolts enough, due to quickly fading daylight. Now, Im not saying that there isnt SOME rattle when I tighten them completely, but the VAST majority of the noises in the video are due to two things: 1) Loose u-bolts 2) Loose camera mount on the wooden dowel, so it was knocking against the wing nut at the top anytime I'd hit a bump. I will record another example when I pick the car up from the body shop on the way home. __________________ I don't own a car anymore.