Quote:
Originally Posted by pokeyl
If GTM folds I can have the 4 brackets that mount the supercharger/alternator/power steering pump reproduced. If some one else can cover the intercooler and charge pipes. I also have canned tunes for the 1.0 and 1.5 setups. Last I would go the factory Rotrex pulley system. We can work with Underground Racing Development UDR Underdog Racing Development - Toyota Truck Performance Parts and Accessories | Tundra, Tacoma, 4Runner, FJ Cruiser, Hilux, Land Cruiser | Superchargers, Clutches, Headers, Exhaust, Pulleys, Rotrex, Gauges, Intakes
I have had to use them when GTM did not help. See this post for more about that... Missing Boost |
Pokeyl, are they able to produce the same pulleys that GTM used?
Trying to source an 88mm but want to make sure it will bolt up & line up correctly with what GTM designed. I know the standard rotrex pulley is a 4 bolt but GTM & other kits use 6 bolts for the pulleys.
I spoke with Phunk, depending on schedules & when my car goes under the knife for SC repairs I will be sending him my broken SC unit.
This way he can look at what GTM has done with their kit & then make changes as needed if he wishes to produce his own kit in the future.