Nissan 370Z Forum - View Single Post - People with Modded Vortech V3 stillen kit chime in!!

EVOHUNTER · 03-17-2015, 02:20 PM

I've been looking into it, Either rotate the blower to 90 degrees and run the pipe down the fan shroud, on the driver side. around the rad and into the intercooler. then up through the passenger side into a Y, then into the TB's. Theres minimal space this way.

Or keep the blower in the same position, run a 12" pipe up to the factory coolant cap, then run it down between the 2 fans, there a lot of space that way. Then back around the passenger or driver side.

There isn't much room the way your thinking.

03-17-2015, 02:20 PM	#23 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	I've been looking into it, Either rotate the blower to 90 degrees and run the pipe down the fan shroud, on the driver side. around the rad and into the intercooler. then up through the passenger side into a Y, then into the TB's. Theres minimal space this way. Or keep the blower in the same position, run a 12" pipe up to the factory coolant cap, then run it down between the 2 fans, there a lot of space that way. Then back around the passenger or driver side. There isn't much room the way your thinking. __________________ Last edited by EVOHUNTER; 03-17-2015 at 02:25 PM.