Quote:
Originally Posted by ksagis
@RonRizz
You mention Xover at 50 hertz, I assume that's highpass and active, what order of cutoff were you using at 50 hertz?
Were you using another active filter, routing to the passive module for the Hertz, or simply relying on natural rolloff? If you were using a passive filter, was the impedance of Hertz and Lanzar about the same?
Thanks
|
I am running fully active off the processor in my head unit.
I am bandpassing my hertz woofers at 63hz with a 6db slope, to 1600hz with a 12db slope, and when I change to the Lanzars, I'm dropping to 50hz, and a 12db slope, to 1600hz with a 12db slope..... I run 2 sets of tweeters, the first are band passed from 1600 to 12khz, with a 12db slope, the second set in my a pillars are high passed at 12khz, with a 12 db slope.