Originally Posted by ValidusVentus

Shipped fast, received in great condition and hitch works perfectly!

I do recommend you get some fast setting semi strong adhesive to hold the hitch in perfect position on the crash bar while you drill both side's holes tho. Just do the test fit step and mark the proper hitch position on the crash bar beforehand. Then remove both from the car and just drill straight through the hitch bolt holes, one side at a time, with the hitch adhered in position on the crash bar (whole assembly on ground). Or drill one side, insert the bolts, flip it all over while holding the bolts in (the bolts are holding the hitch in alignment) and then drill the other side, just be careful not to drill into the ends of the bolts once your through the crash bar. Got perfect alignment on 1st try and felt this was more reliable than just marking the holes where to drill.