Quote:
Originally Posted by 90 ST
You have to take a lot of the side panels off, might be better off just sliding the cable under the panels that hold the headliner up. You may need to remove the A pilar the rest you can slide the cable between.
|
Thank you, that definitely takes care of the sides. However, the camera's mounted next to the rear view mirror on the windshield to comply with local laws.
I need to tuck that cable under the headliner and I'm worried if I don't do that properly I'll put a visible crease in it. I already did this for the camera's power, but that wire is very thin and it went up there without any resistance. The cable that goes to the rear camera is thicker than a typical USB cable though
