Looking specifically at the supercharger, sizing the pulley appropriately is your best bet. When I had the GTM Twin SC kit, those superchargers had plenty of room to spin higher. I was on the 92mm pulley, the lowest was 84mm, and the max impeller speed is 100,000rpm. If you are spinning too fast, you can always reduce the crank pulley size.
If you take engine rpm x crank diameter x supercharger ratio divided by the supercharger pulley diameter, this will tell you the max impeller speed.
Example: max impeller speed for specs below are 95931rpm.
7500rpm engine
124mm crank pulley
1:9.49 crank ratio
92mm SC pulley
__________________
Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI
New Car: Under Construction
Last edited by SS_Firehawk; 02-26-2015 at 10:01 AM.
|